Is Stabilizer Needed for Inverter AC?

Is Stabilizer needed for Inverter AC? Well, if you are also looking for an answer to this question then this article is going to help you. The stabilizer is an inbuilt air conditioner; with stabiliser-free operation; writing it above means that the Air Conditioner used in today’s modern era can control voltage fluctuation. There is no need to put an extra stabiliser inside such containers. So, friends, you must have heard such lines, but that is only half the story.

It is necessary to install an external stabiliser in the air conditioner, and I am going to explain it Is Stabilizer Needed for the Inverter AC in this article. My name is Jitendro Dubey, and I will tell you that stabilisers are needed for inverter air conditioners.

Also Read: Inverter AC Vs Non-Inverter AC Differences

Why put a Stabilizer in Air Conditioner?

So, friends, whether you have an inverter AC or a non-inverter AC, its components are designed to tolerate voltage fluctuations. This also has a limitation. There are different ranges for tolerating voltage in AC. There is an AC that can run from 130 volts to 280 volts. But if you live in a developing country then voltage fluctuations are bound to happen.

Even if you are in the city.  You are living here in the village, the voltage must be down for sure. Air conditioners are such an expensive item. Inside this, there is a component like a compressor or a PCB  for voltage up and down a compressor that can be damaged. If this component gets damaged, you’ll have to spend heavily out of your pocket.

In today’s modern era, the stabilizer-free operation is written in AC. Seeing this, almost all people do not buy stabilizers with AC. Your AC may be faulty even with the stabilizer-free operation. because The expensive component that is installed inside your AC, like the compressor PCB, is a limitation of the voltage handling. Friends, your inverter AC and non-inverter AC are not safe without a stabilizer. If such a case occurs, there is a voltage fluctuation and the voltage goes too high or below the range of your AC, then there may be a problem in your AC. any component may burn out, and a mechanic may have to be called It may cost you dearly.

Also Read: Best Split Air Conditioner Brands in India

Benefits of Using Air Conditioner Stabilizer

If there is a lot of voltage fluctuation in your area. You get an external stabilizer from 2000 to ₹ 5000. External stabilizers are specifically designed to supply Voltage 220-240V to ac. If the voltage comes more or less than the specified range, which is the normal range of 220- 240v.So the work of a stabilizer is to keep the voltage stable, Sir, whether the voltage is less than 220 or more than 240, the stabilizer gives you the 220 voltage at a constant rate only. If your voltage is too high or too low, then the stabilizer has a feature of supply cut out which will keep your ac safe by cutting the power supply.

Apart from this, the stabilizer comes with many more features like thermal overload protection and an initial time delay system. Your AC remains very protected with all these features. Due to the thermal overload protection in the stabilizer, if the motor in your AC gets damaged due to any reason, then it takes a lot of current, due to which the stabilizer senses you and protects it from getting worse.

If there is a lot of situation in your area or there is a cutout, then the initial delay system is very useful. If your voltage fluctuation and cut out is happening before 3 minutes then the voltage stabilizer delays your 3 minutes power supply. So there are many benefits of using an external stabilizer.

So friends, do not go into anyone’s words and it is written in yours that built-in stabilizer and stabilizer-free operation, so friends, do not go into these things and must buy an external stabilizer for yourself. Your air conditioner also survives while doing voltage tolerance, but your component becomes weak. Next Time  When voltage fluctuation occurs definitely your AC component may be damaged.

So friends, if you have a non-inverter or inverter AC, then definitely install a stabilizer. I will tell you about the top stabilizer coming to India. You can check out my top stabilizer given in this article.

Also Read: Can We Use AC Water in Inverter Battery?

Best Stabilizer for the Inverter AC

1. V-Guard iD4 Ace 5540 Voltage Stabilizer

V-Guard is considered the best in the world of stabilizers. I recommended V-Guard First Position to you because their stabiliser is the best. Copper winding is found inside this stabiliser of V-Guard. This model has an ABS body and a 1.5-ton AC capacity.

You can use the stabiliser with an inverter or non-inverter AC. Whatever the split or window, you can use it. Also, the voltage stability in the V-guard stabiliser will be in the 130 V to 280 V voltage range. This stabiliser comes with multiple safety features like a low and high-voltage cut-off, smart output voltage correction, and an initial time delay.

It has a seven-segment digital display with a colour-changing ring that indicates high cut, low cut, or no output if the voltage is high, blue if the input voltage is greater than 200 volts, and violet if the input voltage is less than 200 volts. This stabiliser comes with a 3-year warranty. Its cost is around 5000 rupees.

Also Read: Best 1.5 Ton Split AC in India

V-Guard iD4 Ace 5540 Voltage Stabilizer Specifications

V-Guard iD4 Ace 5540 Voltage Stabilizer	Specifications
Brand	V-Guard
Capacity	1.5 TON
Transformer Winding	Copper
Item Dimensions and Weight LxWxH	‎32 x 24 x 13.6 Centimeters
Weight	6Kg 700g
Voltage	‎130-280 VAC
Installation Type	‎Wall Mounted
Special Features	Intelligent Time Delay System, Built-In Thermal Overload Protection, Low and high voltage cut-offs, Smart output voltage correction, Initial time delay
Price in India	Rs 4825

Pros and Cons

2. Microtek EM4130+ Automatic Voltage Stabilizer for AC

Microtek stabilizer is a very well-known brand in India. Microtek stabilizer provides high performance with Save power technology. You get a copper winding transformer inside this stabilizer. This stabilizer works on 130v-300v 1.5-Ton AC. This stabilizer is capable of inverter and non-inverter AC or windows or split. The stabilizer comes with an advanced seven-segment digital display, display which shows input-output voltage readings. Inside it, you get low & high Cut Off, and advanced Auto-Start features but you do not get overload protection in this. Microtek stabilizer offers a service warranty of  3 years. It cost around 4000 rupees in India.

Also Read: How To Calculate Air Conditioner Room Size?

Microtek EM4130+ Automatic Voltage Stabilizer Specifications

Microtek EM4130+ Automatic Voltage Stabilizer	Specifications
Brand	Microtek
Capacity	1.5 Ton
Transformer Winding	Copper
Item Dimensions and Weight LxWxH	‎28 x 19.5 x 29.5 Centimeters
weight	8Kg 300g
Voltage	‎130-300 VAC
Installation Type	‎Wall Mounted
Special Features	Low and high voltage cut-offs, Auto-Start, Initial time delay, Digital Display
Price in India	Rs 4049

Pros and Cons

3. IFB IVS 1705A 150-305V Voltage Stabilizer

IFB is a well-known brand in India, and its air conditioners are also very popular. This stabiliser operates on a 150-305 volt voltage range and a 2-ton alternating current. This stabiliser is suitable for both inverter and non-inverter AC. You get a copper-wound transformer inside this stabilizer. The stabilizer comes with an advanced seven-segment digital display that shows input-output voltage readings. This stabiliser comes with multiple safety features. You get a smart time delay system, high and low cutoffs, and thermal overload protection. IFB stabilisers offer a service warranty of 3 years. It costs around 4500 rupees in India.

Also Read: What Is The Difference Between 1 Ton and 1.5 Ton AC?

IFB IVS 1705A 150-305V Voltage Stabilizer Specifications

IFB IVS 1705A 150-305V Voltage Stabilizer	Specifications
Brand	IFB
Capacity         ‎	2 Ton
Transformer Winding	Copper
Item Dimensions and Weight LxWxH	‎27 x 20.5 x 9.5 Centimeters
Weight	5Kg 850g
Voltage	‎150-305V VAC
Installation Type	‎Wall Mounted
Special Features	Smart Time Delay System, High and Low Cutoff, Thermal Overload Protection
Price in India	Rs 4400

Pros and Cons

4. BLUEBIRD STABILIZER BA415C 4KVA Stabilizer

Bluebird’s stabiliser comes with copper winding, so its performance is very good. Its working voltage capacity is 150v – 280v. It contains a 50-second time delay system. It contains a 50-second time delay system. The stabilizer comes with a digital display that shows input and output voltage readings. In this, you get a high-low cutoff feature that provides good protection for your AC. This stabiliser can be used for up to 1.5 tonnes of inverter or non-inverter AC. This stabiliser is backed by a 3-year on-site warranty. You can buy this stabiliser for 3500 rupees.

Also Read: Best Cooler for Closed Rooms

BLUEBIRD STABILIZER BA415C 4KVA Stabilizer Specifications

BLUEBIRD STABILIZER BA415C 4KVA Stabilizer	Specifications
Brand	Bluebird
Capacity         ‎	1.5 Ton
Transformer Winding	Copper
Item Dimensions and Weight LxWxH	‎32 x 24 x 13.6 Centimeters
Weight	6Kg 610g
Voltage	‎130-280 VAC
Installation Type	‎Wall Mounted
Special Features	Low and High Voltage Cut-Off, Smart Output Voltage Correction, LED Display
Price in India	Rs 3790

Pros and Cons

5. Everest EWD 400-D Double Booster Classic Digi Voltage Stabilizer for AC

The stabiliser of Everest comes inside the metal body’s space-saving, ultra-slim design. It can also be used in air conditioning units weighing up to 1.5 tons. You will get copper winding in this, and the voltage range will be from 140 to 270 volts. This stabiliser is suitable for both inverter and non-inverter AC. This stabiliser comes with multiple safety features. You get a 3-minute time delay system, auto cutoff, and thermal overload protection. The stabilizer comes with a digital display that shows input and output voltage readings. This comes with a 5-year warranty that includes a 1-year replacement warranty and a 4-year service warranty. You can buy this stabiliser for 3500 rupees.

Also Read: 1 TON AC Room Size

Everest EWD 400-D Double Booster Classic Digi Voltage Stabilizer Specifications

Everest EWD 400-D Double Booster Classic Digi Voltage Stabilizer	Specifications
Brand	Everest
Capacity         ‎	1.5 Ton
Transformer Winding	Copper
Item Dimensions and Weight LxWxH	‎20 x 27 x 6 Centimeters
Weight	6 Kg
Voltage	140 V to 270 V
Installation Type	‎Wall Mounted
Special Features	3 Min Time Delay System, Auto Cutoff, Thermal Overload Protection, LED display
Price in India	Rs 3660

Pros and Cons

Final Thoughts

I hope after reading this article completely, there will be no hesitation in your mind about whether you should take a stabilizer for your air conditioner or not. Apart from this, it is your confession which stabilizer to take. I have told the stabilizer of all well-known brands in this article.

After researching a lot on the web and after seeing customer reviews, I have brought some selected stabilizers in front of you. In this list, I have told about the stabilizer of all brands. I have told you about the specification of all the stabilizers. I have also told you what are the advantages and disadvantages of these types of stabilizers.

We hope you find this information very useful. I want to thank you from the bottom of my heart for your time reading this article about the best stabilizer for your air conditioner.

Also Read: Best Dehumidifiers in India